Search:

Cement Masons, Concrete Finishers, Segmental Pavers, and Terrazzo Workers

Construction trades and related workers


Significant Points

  • Job opportunities are expected to be good, especially for those with the most experience and skills.
  • Most learn on the job or though a combination of classroom and on-the-job training that can take 3 to 4 years.
  • Cement masons often work overtime, with premium pay, because once concrete has been placed, the job must be completed.

Nature of Work

Cement masons, concrete finishers, and terrazzo workers all work with concrete, one of the most common and durable materials used in construction. Once set, concrete—a mixture of Portland cement, sand, gravel, and water—becomes the foundation for everything from decorative patios and floors to huge dams or miles of roadways.

Cement masons and concrete finishers place and finish concrete. They also may color concrete surfaces, expose aggregate (small stones) in walls and sidewalks, or fabricate concrete beams, columns, and panels. In preparing a site to place concrete, cement masons first set the forms for holding the concrete and properly align them. They then direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it. Masons then guide a straightedge back and forth across the top of the forms to ?screed,? or level, the freshly placed concrete. Immediately after leveling the concrete, masons carefully float it—smooth the concrete surface with a ?bull float,? a long-handled tool about 8 by 48 inches that covers the coarser materials in the concrete and brings a rich mixture of fine cement paste to the surface.

After the concrete has been leveled and floated, concrete finishers press an edger between the forms and the concrete and guide it along the edge and the surface. This produces slightly rounded edges and helps prevent chipping or cracking. Concrete finishers use a special tool called a ?groover? to make joints or grooves at specific intervals that help control cracking. Next, they smooth the surface using either a powered or hand trowel, a small, smooth, rectangular metal tool.

Sometimes, cement masons perform all the steps of laying concrete, including the finishing. As the final step, they retrowel the concrete surface back and forth with powered or hand trowels to create a smooth finish. For a coarse, nonskid finish, masons brush the surface with a broom or stiff-bristled brush. For a pebble finish, they embed small gravel chips into the surface. They then wash any excess cement from the exposed chips with a mild acid solution. For color, they use colored premixed concrete. On concrete surfaces that will remain exposed after the forms are stripped, such as columns, ceilings, and wall panels, cement masons cut away high spots and loose concrete with hammer and chisel, fill any large indentations with a Portland cement paste, and smooth the surface with a carborundum stone. Finally, they coat the exposed area with a rich Portland cement mixture, using either a special tool or a coarse cloth to rub the concrete to a uniform finish.

Throughout the entire process, cement masons must monitor how the wind, heat, or cold affects the curing of the concrete. They must have a thorough knowledge of concrete characteristics so that, by using sight and touch, they can determine what is happening to the concrete and take measures to prevent defects.

Segmental pavers lay out, cut, and install pavers—flat pieces of masonry made from compacted concrete or brick. This masonry is typically installed in patios, sidewalks, plazas, streets, crosswalks, parking lots, and driveways. Installers usually begin their work on a previously prepared base that has been graded to the proper depth, although some projects may include the base preparation. A typical segmental paver installation begins with leveling a layer of sand, followed by placement of the pavers, normally by hand but sometimes by machine. Usually the work includes constructing edges to prevent horizontal movement of the pavers. Sand is then added to fill the joints between the pavers.

Terrazzo workers create attractive walkways, floors, patios, and panels by exposing marble chips and other fine aggregates on the surface of finished concrete. Much of the preliminary work of terrazzo workers is similar to that of cement masons. There are six different types of terrazzo, but the focus of this description is on the most common standard terrazzo: Marble-chip terrazzo, which requires three layers of materials. First, cement masons or terrazzo workers build a solid, level concrete foundation that is 3 to 4 inches deep. Second, after the forms are removed from the foundation, workers add a 1-inch layer of sandy concrete. Terrazzo workers partially embed, or attach with adhesive, metal divider strips in the concrete wherever there is to be a joint or change of color in the terrazzo. For the third and final layer, terrazzo workers blend and place into each of the panels a fine marble chip mixture that may be color-pigmented. While the mixture is still wet, workers add additional marble chips of various colors into each panel and roll a lightweight roller over the entire surface.

When the terrazzo is thoroughly set, helpers grind it with a terrazzo grinder, which is somewhat like a floor polisher, only much heavier. Any depressions left by the grinding are filled with a matching grout material and hand-troweled for a smooth, uniform surface. Terrazzo workers then clean, polish, and seal the dry surface for a lustrous finish.

Work environment. Concrete, segmental paving, or terrazzo work is fast-paced and strenuous, and requires continuous physical effort. Because most finishing is done at floor level, workers must bend and kneel often. Many jobs are outdoors, and work is generally halted during inclement weather. The work, either indoors or outdoors, may be in areas that are muddy, dusty, or dirty. To avoid chemical burns from uncured concrete and sore knees from frequent kneeling, many workers wear kneepads. Workers usually also wear water-repellent boots while working in wet concrete.

Most workers work 40 hours a week, although the number of hours can be increased or decreased by outside factors. Earnings for workers in these trades can be reduced on occasion because poor weather and slowdowns in construction activity limit the time they can work.

Qualifications

Most cement masons, concrete finishers, segmental pavers, and terrazzo workers learn their trades through on-the-job training, either as helpers or in apprenticeship programs. Some workers also learn their jobs by attending trade or vocational-technical schools.

Education and training. Many masons and finishers first gain experience as construction laborers. (See the section on construction laborers elsewhere in the Handbook.) Most on-the-job training programs consist of informal instruction, in which experienced workers teach helpers to use the tools, equipment, machines, and materials of the trade. Trainees begin with tasks such as edging, jointing, and using a straightedge on freshly placed concrete. As training progresses, assignments become more complex, and trainees can usually do finishing work within a short time.

Other workers train in formal apprenticeship programs usually sponsored by local contractors, trade associations, or local union-management committees. These earn while you learn programs provide on-the-job training and the recommended minimum of 144 hours of classroom instruction each year. In the classroom, apprentices learn applied mathematics, blueprint reading, and safety. Apprentices generally receive special instruction in layout work and cost estimation. Apprenticeships may take 3 to 4 years to complete. Applying for an apprenticeship may require a written test and a physical exam.

Many States have technical schools that offer courses in masonry which improve employment and advancement opportunities. Entrance requirements and fees vary depending on the school and who is funding the program. These schools may offer courses before hiring or after hiring as part of the on-the-job training.

Other qualifications. The most important quality employers look for is dependability and a strong work ethic. When hiring helpers and apprentices, employers prefer high school graduates who are at least 18 years old, possess a driver?s license, and are in good physical condition. The ability to get along with others is also important because cement masons frequently work in teams. High school courses in general science, mathematics, and vocational-technical subjects, such as blueprint reading and mechanical drawing provide a helpful background. Cement masons, concrete finishers, segmental pavers, and terrazzo workers should enjoy doing demanding work. They should take pride in craftsmanship and be able to work without close supervision.

Advancement. With additional training, cement masons, concrete finishers, segmental pavers, or terrazzo workers may become supervisors for masonry contractors or move into construction management, building inspection, or contract estimation. Some eventually become owners of businesses, where they may spend most of their time managing rather than practicing their original trade. For those who want to own their own business, taking business classes will help them prepare.

Employment

Cement masons, concrete finishers, segmental pavers, and terrazzo workers held about 229,000 jobs in 2006; segmental pavers and terrazzo workers accounted for only a small portion of the total. Most cement masons and concrete finishers worked for specialty trade contractors, primarily foundation, structure, and building exterior contractors. They also worked for contractors in residential and nonresidential building construction and in heavy and civil engineering construction on projects such as highways; bridges; shopping malls; or large buildings such as factories, schools, and hospitals. A small number were employed by firms that manufacture concrete products. Most segmental pavers and terrazzo workers worked for specialty trade contractors who install decorative floors and wall panels.

Only about 2 percent of cement masons, concrete finishers, segmental pavers, and terrazzo workers were self-employed, a smaller proportion than in other building trades. Most self-employed masons specialized in small jobs, such as driveways, sidewalks, and patios.

Job Outlook

Average employment growth is expected, and job prospects are expected to be good, especially for those with the most experience and skills.

Employment change. Employment of cement masons, concrete finishers, segmental pavers, and terrazzo workers is expected to grow 11 percent over the 2006-16 decade, about as fast as the average for all occupations. More workers will be needed to build new highways, bridges, factories, and other residential and nonresidential structures to meet the demands of a growing population. Additionally, cement masons will be needed to repair and renovate existing highways and bridges and other aging structures.

The use of concrete for buildings is increasing. For example, residential construction in Florida is using more concrete as building requirements are changed in reaction to the increased frequency and intensity of hurricanes. Concrete use is likely to expand into other hurricane-prone areas as the durability of the Florida homes is demonstrated.

Job prospects. Opportunities for cement masons, concrete finishers, segmental pavers, and terrazzo workers are expected to be good, particularly for those with the most experience and skills. Employers report difficulty in finding workers with the right skills, as many qualified jobseekers often prefer work that is less strenuous and has more comfortable working conditions. There are expected to be a significant number of retirements over the next decade, which will create more job openings. Applicants who take masonry-related courses at technical schools will have better opportunities than those without these courses.

Employment of cement masons, concrete finishers, segmental pavers, and terrazzo workers, like that of many other construction workers, is sensitive to the fluctuations of the economy. Workers in these trades may experience periods of unemployment when the overall level of construction falls. On the other hand, shortages of these workers may occur in some areas during peak periods of building activity.

Projections Data

Projections data from the National Employment Matrix
Occupational title
SOC Code
Employment, 2006
Projected
employment,
2016
Change, 2006-16
Detailed statistics
Number
Percent

Cement masons, concrete finishers, segmental pavers, and terrazzo workers

--
229,000
255,000
26,000
11
--
--

Cement masons, concrete finishers, and terrazzo workers

47-2050
228,000
254,000
26,000
11
PDF
zipped XLS

Cement masons and concrete finishers

47-2051
222,000
247,000
25,000
11
PDF
zipped XLS

Terrazzo workers and finishers

47-2053
6,800
7,500
700
11
PDF
zipped XLS

Segmental pavers

47-4091
1,000
1,100
100
10
PDF
zipped XLS

    NOTE: Data in this table are rounded. See the discussion of the employment projections table in the Handbook introductory chapter on Occupational Information Included in the Handbook.

Earnings

In May 2006, the median hourly earnings of wage and salary cement masons and concrete finishers were $15.70. The middle 50 percent earned between $12.38 and $20.70. The bottom 10 percent earned less than $10.02, and the top 10 percent earned more than $27.07. Median hourly earnings in the industries employing the largest numbers of cement masons and concrete finishers were as follows:

Masonry contractors$17.05
Nonresidential building construction16.34
Highway, street, and bridge construction16.20
Other specialty trade contractors16.15
Poured concrete foundation and structure contractors15.38

In May 2006, the median hourly earnings of wage and salary terrazzo workers and finishers were $15.21. The middle 50 percent earned between $12.01 and $20.50. The bottom 10 percent earned less than $9.31, and the top 10 percent earned more than $27.22.

In May 2006, the median hourly earnings of wage and salary segmental pavers were $13.80. The middle 50 percent earned between $10.47 and $17.05. The bottom 10 percent earned less than $8.41, and the top 10 percent earned more than $19.11.

Like other construction trades workers, earnings of cement masons, concrete finishers, segmental pavers, and terrazzo workers may be reduced on occasion because poor weather and slowdowns in construction activity limit the amount of time they can work. Nonunion workers generally have lower wage rates than union workers. Apprentices usually start at 50 to 60 percent of the rate paid to experienced workers, and increases are generally achieved by meeting specified advancement requirements every 6 months. Cement masons often work overtime, with premium pay, because once concrete has been placed, the job must be completed.

Some cement masons, concrete finishers, segmental pavers, and terrazzo workers belong to unions, mainly the Operative Plasterers? and Cement Masons? International Association of the United States and Canada, and the International Union of Bricklayers and Allied Craftworkers. A few terrazzo workers belong to the United Brotherhood of Carpenters and Joiners of the United States.

Related Occupations

Cement masons, concrete finishers, segmental pavers, and terrazzo workers combine skill with knowledge of building materials to construct buildings, highways, and other structures. Other occupations involving similar skills and knowledge include brickmasons, blockmasons, and stonemasons; carpet, floor, and tile installers and finishers; drywall installers, ceiling tile installers, and tapers; and plasterers and stucco masons.

Sources of Additional Information

For information about apprenticeships and work opportunities, contact local concrete or terrazzo contractors, locals of unions previously mentioned, a local joint union-management apprenticeship committee, or the nearest office of the State employment service or apprenticeship agency. Apprenticeship information is also available from the U.S. Department of Labor?s toll free helpline: (877) 872-5627. You may also check the U.S. Department of Labor?s Web site for information on apprenticeships and links to State apprenticeship programs. Internet: http://www.doleta.gov/jobseekers/apprent.cfm

For general information about cement masons, concrete finishers, segmental pavers, and terrazzo workers, contact:

  • Associated Builders and Contractors, Workforce Development Division, 4250 North Fairfax Dr., 9th Floor, Arlington, VA 22203. Internet: http://www.trytools.org
  • Associated General Contractors of America, Inc., 2300 Wilson Blvd., Suite 400, Arlington, VA 22201. Internet: http://www.agc.org
  • International Union of Bricklayers and Allied Craftworkers, International Masonry Institute, The James Brice House, 42 East St., Annapolis, MD 21401. Internet: http://www.imiweb.org
  • National Center for Construction Education and Research, 3600 NW. 43rd St., Bldg. G, Gainesville, FL 32606. Internet: http://www.nccer.org
  • National Concrete Masonry Association, 13750 Sunrise Valley Dr., Herndon, VA 20171-3499. Internet: http://www.ncma.org
  • National Terrazzo and Mosaic Association, 201 North Maple, Suite 208, Purcellville, VA 20132.
  • Operative Plasterers? and Cement Masons? International Association of the United States and Canada, 11720 Beltsville Dr., Suite 700, Beltsville, MD 20705. Internet: http://www.opcmia.org
  • Portland Cement Association, 5420 Old Orchard Rd., Skokie, IL 60077. Internet: http://www.cement.org
  • United Brotherhood of Carpenters and Joiners, 50 F St. NW., Washington, DC 20001. Internet: http://www.carpenters.org

For more information about careers and training as a mason, contact:

For general information on apprenticeships and how to get them, see the Occupational Outlook Quarterly article ?Apprenticeships: Career training, credentials—and a paycheck in your pocket,? online at http://www.bls.gov/opub/ooq/2002/summer/art01.pdf and in print at many libraries and career centers.

Source: Bureau of Labor Statistics Occupational Outlook Handbook

Privacy Policy  |  California Residents: Do Not Sell My Personal Information  |  Disclosure: “What Determines Top/Best?”  |  Terms of Use  | 
© 2024 TriAd Media Solutions, Inc. All Rights Reserved

Disclosure: Not all programs are accelerated, available in all locations, or in both online and on-campus formats. The transferability of credits is subject to each school's transfer credit policy. Financial aid including grants, scholarships and loans may be available to those who qualify. Program lengths and outcomes vary according to each institution's specific curriculum and employment opportunities are not guaranteed. CompareTopSchools is a consumer information site that offers free ratings and recommendations of colleges and universities. We are an advertising-supported service and receive compensation from many of the schools that appear on our site. Compensation may impact which schools we rate and recommend and where those schools appear. CompareTopSchools takes into consideration several proprietary rules to determine how and where schools appear on our website. All opinions expressed on this site are our own, including, without limitation, our designation of a particular institution as being a "top" school.